(1/2) 007-01 / 20090910 / e9413_mpz.fm ? all specifications are subject to change without notice. chip beads(smd) for power line mpz series mpz2012 type features ? the mpz series are multilayer chip impeders for power supply line applications. ? high miniaturized, these parts nonetheless exhibit low dc resistance and high current handling capability. ? the products contain no lead and also support lead-free soldering. ? it is a product conforming to rohs directive. applications removal of power line noises of cellular phones, pcs, note pcs, tvs, tv tuners, stbs, audio players, dvds, dscs, dvcs, game machines, digital photo frames, car navigation system, pnds, etc. product identification (1)series name (2)dimensions l w (3)material code (4)nominal impedance 331: 330 at 100mhz (5)characteristic type (6)packaging style t: taping handling and precautions ? before soldering, be sure to preheat components. the preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. ? after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. ? do not expose the inductors to stray magnetic fields. ? avoid static electricity discharge during handling. ? when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. shapes and dimensions/recommended pc board patt er n temperature ranges packaging style and quantities recommended soldering condition reflow soldering conformity to rohs directive mpz 2012 s 331 a t (1) (2) (3) (4) (5) (6) operating/storage ?55 to +125c packaging style quantity taping 4000 pieces/reel 1.25 0.2 0.85 0.2 0.5 0.3 2.0 0.2 weight: 8mg dimensions in mm 1 0.8 0.8 1.2 natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230?c 250 to 260?c 180?c 150?c time(s) ? please contact our sales office when your application are considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) ? conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/2) 007-01 / 20090910 / e9413_mpz.fm ? all specifications are subject to change without notice. electrical characteristics ? 1 test equipment : e4991a or equivalent test tool : 16192a or equivalent test temperature: 2510c ? 2 please refer to the graph of rated current vs. temperature characteristics(derating) about the rating current at 85c or more in temperature of the product. rated current vs. temeperature characteristics (derating) typical electrical characteristics z, x, r vs. frequency characteristics mpz2012s300a MPZ2012S101A mpz2012s221a mpz2012s331a mpz2012s601a mpz2012s102a packaging styles reel dimensions tape dimensions part no. impedance ( )[100mhz] ? 1 dc resistance ( )max. rated current ? 2 (a)max. mpz2012s300a 3010 0.01 6 MPZ2012S101A 10025% 0.02 4 mpz2012s221a 22025% 0.04 3 mpz2012s331a 33025% 0.05 2.5 mpz2012s601a 60025% 0.1 2 mpz2012s102a 100025% 0.15 1.5 s300a s331a s101a s221a s601a s102a 0 1 2 3 4 5 6 7 ?55 ?35 ?15 5 25 45 65 85 105 125 temperature ( ?c ) rated current ( a ) 50 40 30 20 10 0 1 10 100 1000 10000 frequency ( mhz ) impedance ( ) z x r 160 140 120 100 80 60 40 20 0 1 10 100 1000 10000 frequency ( mhz ) impedance ( ) z r x 300 100 50 150 200 250 0 1 10 100 1000 10000 frequency ( mhz ) impedance ( ) z r x 400 350 300 250 200 150 100 50 0 1 10 100 1000 10000 frequency ( mhz ) impedance ( ) z r x 800 700 600 500 400 300 200 100 0 1 10 100 1000 10000 frequency ( mhz ) impedance ( ) z r x 1200 400 200 600 800 1000 0 1 10 100 1000 10000 frequency ( mhz ) impedance ( ) z r x 1.0 ?180 2.0 2.0 0.5 ?13 0.2 ?21 0.8 ?60min. 14.4max. dimensions in mm 8.4 +2.0 ?0.0 8.0 0.3 3.5 0.05 1.75 0.1 1.1max. 4.0 0.1 4.0 0.1 2.0 0.05 1.5 +0.1 ?0.0 sprocket hole cavity 2.3 0.2 1.5 0.2 160min. taping 200min. 300min. drawing direction dimensions in mm
|
